Saturday, January 24, 2009

No-sew Valentine Garland

I'm back in the creative groove. I am always so behind in making seasonally appropriate items, but no longer - look at this - a whole three weeks in advance of the day. I was desperate to use some of the red and white fat quarter fabric that Andrea had sent me and this idea had been in my head for a while (several years actually - I like to let my ideas mature don't you know).


I thought I might as well take a few pictures along the way so here it is - my no-sew heart tutorial.


BTW - the background is my old cutting board that I don't use for cutting fabric, it is messy and horrible but ideal for a base to cover the table while I glue.


Here's all you need:
  • cardboard from a cereal carton or the like
  • scraps of batting
  • glue gun
  • cotton fabric
  • ribbon
Step 1
Draw round a heart template on your cardboard, I used 5 hearts in my garland but you could have as many as you like.


Step 2
Cut the hearts out of the cardboard

Step 3
On the coloured side of the card, use your glue gun to put 3 dots of glue on the heart shape (one near the point and the other 2 either side of the 'V', if you see what I mean). There is no need to spread the glue all over the card, this is just to hold the batting in place so that it doesn't move around so three dots are all you need.

Step 4
Plonk the card glue side down on a scrap of batting - I used what I had around - you want it to be a fairly high loft to give the heart some shape.

Step 5
Cut the batting level with the edge of the card.
Step 6
Cut your fabric about 1/2 inch bigger than the heart template (I just drew round the template I used for the card and cut the fabric a bit bigger by eye, but you could make another template just for the fabric)

Step 7
Position the card, batting side down on the wrong side of the fabric, making sure that it is placed in the middle of the fabric.

Step 8
Holding all the layers together, turn it over and pin the fabric to the batting.

Step 9
Pull the fabric over to the back of the heart and glue it down all around the edge with the glue gun. I made sure that I stuck down the top and the bottom of the heart first, because you have to pull the fabric quite firmly and that way it doesn't shift around too much. The back of the heart should then look like this ...

... and the front of it should look like this.

Step 10
Take a piece of ribbon long enough to go through all of your hearts with excess at the ends to hang your garland from. Glue the ribbon to the hearts with a dot of glue at each side of the heart, leaving about an inch of ribbon between the hearts.

Step 11
Use your heart template again to cut more heart shapes, this time out of pelmet vilene - you need to cut a smidgeon within the line you have drawn so that you can't see it from the front of the heart. Because I am a lazy good for nothing woman, all I did then was to glue the pelmet vilene onto the back of the hearts - after all, no one's going to see them, they're against the wall. But ... you could do it in a couple of different ways, depending on your inclinations. You could either use the same fabric as the front to sew a heart shape to the back, turning in the edges as in applique, or, you could use heat'n'bond to fuse fabric to the back of the heart.

After you have done this, your garland is ready to hang and will look something like this.


Which looks okay - but we all know that more is more and I think the addition of some ribbon bows does add a little je ne sais qu'a (or even je ne sais quoi - who would believe that I've got A-Level French?)



And there you have it - a very quick and easy Valentines Garland

22 comments:

Rubyred said...

What a brilliant idea!Great tutorial too.Love the prints you've used,very effective!
Rachel x

Danetta said...

This is adorable. You did a great job showing us how to do it. Thank you.

Sew Create It - Jane said...

Great tutorial!...and very seasonal. :o)

Sandi said...

Great tutorial, Fiona! I made a couple of heart garlands several years ago but I like the touch of the bow between each of the hearts. Perhaps I should make a new one with updated fabrics and pretty bows. Oh, sew many ideas to try!!

sewkalico said...

This is really cute!

anne bebbington said...

So pretty - and you know me I'm always a sucker for hearts!

Leslie said...

How fun,now this one I could do. You're doing garlands! I loved your Christmas stocking garland too. :0)

juanita de la vega said...

They are lovely! Thanks!

jenclair said...

Great tutorial and charming garland!

Ginger said...

Very cute garland & wonderful tutorial.Loved your blog thank you so much for sharing it with all of us!

Rachel@oneprettything.com said...

That is GENIUS! What a fabulous idea! I can't wait to try this. Thanks so much for sharing, I'll be linking to this in an upcoming Valentine's Day Roundup.

Яна said...

I love your garland! Made one last night (altered it a little bit). this is what I came up with - http://www.zrobysama.com.ua/?p=2184
thanks for a great tutorial

Loralynn said...

Darling! Thanks for the idea!

Storm said...

Darling! Thanks for the tutorial.

Katie said...

No Sew is Awesome!

meggie said...

Very sweet & pretty. Great tutorial.

meggie said...
This comment has been removed by the author.
Kindred Crafters said...

Hey there
Found your blog via oneprettything. I had a valentine's day garland featured last week and I gotta say, I like yours better! :)

- Donna
http://www.kindredcrafters1.blogspot.com

Patty said...

I love that your garland is no sew. Thanks for sharing how you made it!

vfdvgf said...

The World Leading wow power leveling and wow gold wow power leveling

buchty said...

a professional manufacturing company.
plastic mold
rapid prototype
we offers an impressive range of r4 cards.
r4 cards
r4 card
R4

Ирина said...

thank you for this great idea!!